Installation steps of 316L stainless steel pipe
The installation steps of 3016L stainless steel pipe 316L stainless steel pipe has become a very popular material on the market due to its many advantages. Today, the editor will explain in detail the installation technology of 316l stainless steel pipes.
1. Design based on factors such as soil quality, groundwater, grooving section, and load conditions of the trench, and ensure that it is firm and reliable to prevent collapse and support without hindering the laying and stabilizing of the pipe.
2. T-shaped interface pipelines should be equipped with support piers at vertical or horizontal turns. The size of the support pier should be determined through calculation based on factors such as pipe diameter, turning angle, and working pressure.
3. After the pipeline installation and pressure test are qualified, rinse with low chloride ion water and disinfect with 0.03% potassium permanganate.
4. The external anti-corrosion coating of stainless steel should be selected based on the soil conditions of the pipe laying site, such as zinc plating, epoxy asphalt coating, or higher required coatings.
5. As long as it is a stainless steel wire connected by socket, it must be calculated and installed with support piers.
6. When transporting domestic drinking water, pipelines should not pass through toxic pollution areas. If necessary, protective measures should be taken.
评论
发表评论